Search Results

Lateral/directional dynamics involve vehicle yawing, rolling and lateral translation motions and dynamic stability concerns directional behavior (i.e. spinout) and rollover. Previous research has considered field test and computer simulation methods and results concerning lateral/directional stability. This paper summarizes measurements and simulation analysis of a wide range of vehicles regarding directional and rollover stability. Directional stability is noted to be strongly influenced by lateral load transfer distribution (LTD) between the front and rear axles LTD influences tire side force saturation properties, and should be set up so that side forces at the rear axle do not saturate before the front axle under hard maneuvering conditions in order to avoid limit oversteer and spinout.

This paper describes a tire model designed for the full range of operating conditions under both on- and off-road surface conditions. The operating conditions include longitudinal and lateral slip, camber angle and normal load. The model produces tire forces throughout the adhesion range up through peak coefficient of friction, and throughout the saturation region to limit slide coefficient of friction. Beyond the peak coefficient of friction region, the off-road portion of the model simulates plowing of deformable surfaces at large side slip angles which can result in side forces significantly above the normal load (e.g., equivalent coefficients of friction greatly exceeding unity). The model allows changing the saturation function depending the surface currently encountered by a given tire in the vehicle dynamics model.

Maneuverable round and ramair parachutes are flown by professional forestry firefighters, search and rescue personnel, and military combat teams when deployment by fixed or rotary aircraft is inappropriate. Parachute flight training requires the development of perceptual skills in canopy control, guidance, and energy management. These parachutists must learn to accurately sense motion visual cues, and predict and manage their trajectory. Parachute guidance and control can only be acquired through repeated practice. Canopy control training has been traditionally limited to a classroom lecture topic. There was no opportunity for the immediate student/instructor dialogue available during the extensive dual flight training used for conventional aircraft, where instruction can occur during the numerous practice landings available via rapid touch-and-go techniques.

This paper describes a low cost, PC based driving simulation that includes a complete vehicle dynamics model (VDM), photo realistic visual display, torque feedback for steering feel and realistic sound generation. The VDM runs in real-time on Intel based PCs. The model, referred to as VDANL (Vehicle Dynamics Analysis, Non-Linear) has been developed and validated for a range of vehicles over the last decade and has been previously used for computer simulation analysis. The model's lateral and longitudinal dynamics have 17 degrees of freedom for a single unit vehicle and 33 degrees of freedom for an articulated vehicle. The model also includes a complete drive train including engine, transmission and front and rear drive differentials, and complete, power assisted braking and steering systems. A comprehensive tire model (STIREMOD) generates lateral and longitudinal forces and aligning torque based on normal load, camber angle and horizontal (lateral and longitudinal) slip.

Ground vehicle dynamic stability, including spinout and rollover, is highly dependent on maneuvering conditions and the nonlinear force response characteristics of tires. Depending on vehicle configuration, unstable behavior requires high, sustained lateral acceleration, and some maneuver induced excitation of the roll and yaw mode dynamics. Dynamic instability in some vehicles can be induced by a steering reversal maneuver that involves sustained limit performance lateral acceleration. Using a validated vehicle dynamics simulation, analysis is presented to illustrate what constitutes a critical stability sensitive maneuver. Two example test cases are used to show that a critical stability sensitive maneuver must be more severe than a single lane change. Even reaching tire saturation limits during an aggressive single lane change does not give the sustained lateral acceleration required to provoke instability conditions.

A combined biodynamic and vehicle model is used to assess the vibration and performance of a human operator performing driving and other tasks. The other tasks include reaching, pointing and tracking by the driver and/or passenger. This analysis requires the coordinated use of separate and mature software programs for anthropometrics, vehicle dynamics, biodynamics, and systems analysis. The total package is called AVB-DYN, an acronym for Anthropometrics, Vehicle and Bio-DYNamics. The biodynamic component of AVB-DYN is described, and then compared with an experiment that studied human operator in-vehicle reaching performance using the U.S. Army TACOM Ride Motion Simulator.